FAQ - Programming

1. How do I program Genie^® Intellicode^®?

To make Intellicode^® fully functional, you willl need your remote control and to be within reach of your Genie^® garage door opener.

A. Locate the “Learn Code” button and indicator LED. Depending on the model, the Learn Code button is usually located under the light cover or at the back of the unit.

B. Press and release the Learn Code button. The indicator LED will blink at a rate of twice per second. Press and release the button on remote control you want to program. The indicator LED will glow steady. Press the same remote control button again. The indicator LED will go out.

C. To check that the button has been programmed correctly, press the button on the remote again. The door should operate. If it does not operate, carefully repeat steps a through c above.

Caution! Before activating the door, be sure that all people, pets, ladders, vehicles and other obstructions are cleared from the door’s path.

D. Repeat steps a through c for multiple doors and/or remote controllers with multiple button.

Note! Up to seven Intellicode^® remote-operated devices can be programmed to one Genie^® Intellicode^® garage door opener. This includes a total of seven Intellicode^® remotes or six Intellicode^® remotes and the Intellicode^® wireless keypad.

2. How do I program my wireless keypad?

It depends on the model. View the list of models and links to on-line programming instructions.